How to clone/backup your Raspberry Pi’s SD card

If you want to preserve all of the data, you will probably have to create a disk image. Furthermore, Windows cannot recognize typical Linux filesystems, so you probably won’t even be able to see your files, when you plug in your SD card.

Creating a disk image will preserve not only files but also the filesystem structure and when you decide to flash your new SD card, you will be able to just plug it in and it will work.

Linux

On Linux, you can use the standard dd tool:

dd if=/dev/sdx of=/path/to/image bs=1M

Where /dev/sdx is your SD card.

Mac

On Mac, you can also use the standard dd tool with a slightly different syntax:

dd if=/dev/rdiskx of=/path/to/image bs=1m

Where /dev/rdiskx is your SD card.

(using rdisk is preferable as its the raw device – quicker)

To find out which disk your device is type diskutil list at a command prompt – also, you may need to be root; to do this type sudo -s and enter your password when prompted.

Windows

Option 1

On Windows, you can use the reverse process that you used when flashing the SD card.

You can use Win32 Disk Imager, which is the preferred tool for flashing a SD card of the Foundation. Just enter the filename, select the device and press read:

Win32 Disk Imager

Of course, you can also use RawWrite, dd for Windows or similar tools, the process is quite similar.

Option 2

If you don’t want to back up your entire system, but only specific files, I suggest you connect to your Raspberry Pi via SFTP and copy the files to your local computer (You can use the WinScp client). If you have SSH enabled, SFTP usually requires no special configuration on the Raspberry Pi side.

Another option is to copy the files to a remote system using rsync.

You can also install special drivers so your Windows can read ext filesystems (and will thus be able to read the whole SD card), such as ext2fsd but it is probably not worth the effort.

 

Source: http://raspberrypi.stackexchange.com/questions/311/how-do-i-backup-my-raspberry-pi

One comment

  1. Pingback: Upgrading to Raspberry PI 4

Comments are closed.

Back to Top